Signals

THE SIGNAL BOX


Railway signalling discussion

Level-crossing gate 'cups' ?

Discussion concerning level crossings

Level-crossing gate 'cups' ?

Unread postby Chris Osment » Sun Apr 2, 2017 5:27 pm

[Mods – I pondered whether to put this in ‘Historical’ or ‘Level Crossings' or even 'S&T Technical’, so feel free to move it as you see fit.]

On the Lynton & Barnstaple Railway there was a level-crossing at Braunton Road, between Barnstaple Town station and Pilton yard. The gates were worked on the ground by a local crossing-keeper, but bolted by a lever in the nearby Pilton signal-box. Pilton also controlled the signals protecting the crossing. Over the 1909/1910 New Year the L&BR’s contractor (unnamed) responsible for maintaining the equipment had removed some of the ‘cups’ {sic} from the gate “locking gear” in preparation for fitting new parts. The crossing-keeper was informed, but apparently not the signalman nor the railway’s Manager. As a result, when the signalman operated his lever to bolt the gates (which he could not see from his location), he was able to pull off the protecting signal for a Down train even though some of the gates were still across the the railway. The train struck the gates, which in turn struck the crossing-keeper, who sadly died later that day from his injuries.

From my reading of the inquest report the ‘cups’ were part of the ‘locking’ at the gates themselves, rather than in the signal-box. But what would they have been?
Chris Osment
West Country Railway Archives
http://www.railwest.org.uk
User avatar
Chris Osment
Main line box
Main line box
 
Posts: 2249
Joined: Sun Nov 11, 2007 9:32 am
Location: Somewhere in the West Country

Return to Level crossings

Who is online

Users browsing this forum: Bing [Bot] and 1 guest